Cutting Oil Additive

Home / Our Products / Lube Additive Packages / Cutting Oil Additive

Cutting Oil Additive is Soluble Cutting Oil Additive. It is a brown color, napthenic or paraffinic oil soluble, a premium, cutting oil additive. It is a true synthetic metalworking coolant capable of easily handling most grinding, sawing, turning, boring, milling and drilling operations. Cutting Oil Additive forms a stable translucent solution over a wide range of water hardnesses and temperatures. This clarity greatly enhances workpiece visibility. This unique formula is non-corrosive to steel, cast iron, brass, copper, aluminum and carbide tooling.

It leaves a light, oily, film that provides short-term indoor rust protection and, unlike other synthetic coolants, lessens the problem of sticking on machine ways and slides. It contains lubricity, defoaming and corrosion preventive additives. The latest and most effective bacterial protection is provided to prevent rancidity.

Its emulsifier mixes readily with water to form stable emulsions and has best rust-preventative properties. It is inhibited against foaming. This product is suitable for a wide range of metal cutting and grinding operations. It will effectively remove heat from the work piece and can be applied as a stream, or in mist form.

Ask For Price?

Handling & Storage

Cutting Oil Additive is a Cutting Oil Additive and is normally handled at room temperature. For general purposes, the following storage and handling temperatures are recommended: Storage Handling 50-70°C (122-158°F). For more extensive information on the safe handling and use of this product, see the Material Safety Data Sheet.

Cutting Oil Additive

Formulations

16 to 20% by weight
In either napthenic or paraffinic base oils. Satisfactory emulsions can be formulated at 5:1 to 100:1 water to oil ratio Meeting the requirements of Soluble Cutting Oil, IS : 1115.

Preparation of Soluble Oils

To achieve a stable emulsion, always add oil to water - never add water to oil. For best emulsion stability and protection against rust and bacterial growth, use deionized or low hardness water ( < 450ppm). Begin by stirring one part oil into four parts water. Next, add water to this mixture to reach the desired dilution. The oil-water ratio may change depending upon operations.

Yes! I am interested

PACKING UNIT

20 kg carboys, 200 kg drums

Specification Sheet

TEST	METHOD	MIN	MAX	VALUE
Appearance	Visual		Clear & Bright	Clear & Bright
Specific Gravity @ 15.6°C	ASTM D 1298	0.94	1.15	0.963
Water content , % wt	ASTM D 95		10	5.1
Viscosity @ 40°C, cSt.	ASTM D 445	200		315
Flash Point, °C (COC)	ASTM D 92	150		155
Ash Content, mass %	ASTM D 482		7.0	3.1
Pour Point, °C	ASTM D 97		-6	-5
Emulsion Test, 5:1 And 20:1 Ratio in Water of 400 PPM Hardness	IS:1448 P:98
Oil layer			0.1	No Separation
Cream layer			0.2	No Separation
Froth Test, 5:1 And 20:1 Ratio in Water of 200 PPM Hardness	IS:1448 P:99	No Froth After 15 Mins		PASS
Cast Iron Corrosion Test, 20:1 Ratio Emulsion With 400 PPM Hard Water	IP125		PASS	PASS
Copper Strip corrosion Test @ 100°C For 3 Hrs	IS:1448 P:15		1	1
Thermal Stability Test	IS:1448 P:100		PASS	PASS

Yes! I am interested

We have been able to gain faith of large number of patrons based across
East Asia, Middle East, UAE, Africa, Taiwan, Indonesia, Turkey, North America, Mexico and Australia